Quantcast
Channel: EngineerZone: Message List
Browsing all 22625 articles
Browse latest View live

Re: Boot DSP

Thank you very much for your comments, Miguel and John. I have added some delays and tried with different delay time, but it doesn't help.I have noticed that SigmaStudio generates different functions...

View Article


Re: Pulse Generator Circuit

Hi Rich, Your application is really interesting. So I have few more questions to ask from you. 1. Can you tell me more details on how you will use the pulse generator circuit in energy research?2. Do...

View Article


Re: How to identify which filter is which on

Miguel: Thanks, I was unaware of the extra step to export much more detailed files for other processor support. I found it under menu "Action"->"Export System Files" I see there is also a tool bar...

View Article

Image may be NSFW.
Clik here to view.

Re: IF output range of AD 8342

Dear Benjamin ,   Thanks for the reply .My requirement was actually to convert the balanced output of AD 8342 to single output which would be fed later to a filter ,, however the transformer TC1-2T as...

View Article

Image may be NSFW.
Clik here to view.

Re: About MP pin setting and highspeed slave mode setting in ADAU144x

Hello Takepiro, 1.  There are no internal pull-ups on the MPx pins when configured as inputs.  2.  These registers can be configured in SigmaStudio under the Hardware Configuration Registers window...

View Article


Re: AD9912 I use spur killer, I need killed spur harmonic 2, It should write...

Hi Grisha, For register 0x500, load the harmonic value. In your case it would be value 2. The since you need to enable the spur reduction function for spur A, you need set bit 7. All together, you have...

View Article

Re: ADV7511 Xilinx Reference Design for Zedboard

Hi, May I know, how to replace the original IMG_DATA (cf_hdmi_demo.h) with other image? ThanksWira

View Article

Re: AD-FMCOMMS2-EB and ZC702 boot image problem

Hi mhennerich, I encounted the similar situation, and I followed the instructions on the webpages that was as same web address as  your suggestion. I have installed a virtual Ubuntu system(version...

View Article


Re: About MP pin in ADAU145x

Hello Takepiro, 1.   Good catch.  This is confusing.  The SigmaStudio indicates this MP_MODE is an input.   I will need to look into this and get back to you on this.  It would make sense this MP_MODE...

View Article


AD9361-Polarity of the Balun

The schematic below is part of the ad-fmcomms3_reva. I wonder what will happen to change the polarity of the Balun. For example, If Swapping of the RX2A (N, P) polarity, is RX performance equal?...

View Article

Re: ADV7393 S-video display issue

Hi PaulS What do you mean by scope plot? Is it Oscilloscope waveform or anything else? I have never heard the term "scope plot" till now. Can you please elaborate? With Regards,Hariprasad Bhat

View Article

Re: Display a frame on monitor from ADSP BF609 EZ kit..

Hi Craig, Thanks for your input.I have tried to write an .bmp to Blackfin Memory and it is done correctly.But our requirement is something like this.1. We have set of 30 images stored in the hard disk....

View Article

Re: Query regarding MultiMaster TWI on BF504F

Hi,I could come across the detail that on successful restart on I2C the MEN bit do not reset.. When I added the line to reset the MEN bit in the software.. Blackfin released the Bus after transaction...

View Article


Image may be NSFW.
Clik here to view.

How to read data from ADC in FMCOMMS2

Hi all, I am using FMCOMMS2 with zedboard. I understood that the DAC is 12-bit so when we make he data accessible to adc the last 4 bits from the 16-bits memory aligned are ignored in DAC. Now I want...

View Article

Re: what's the trigger name of ad9361?

OK, Thank you!

View Article


Re: Who can tell me the differences or relationship of ad9361-phy and...

Thank you very much

View Article

Re: How to get the RX data in AD9361

Hi Michael thanks a lot for the quick reply.sorry for the unclear description, let me clarify that. We want to do a sample data transport test thro loopback test between TX and RX part based on IIO.we...

View Article


Re: AD8400-1KOhm For PT100 Simulation

Hi Reinhard, Thankyou for you reply! The measuring current are:Measuring current for Ohmmeter (Fluke 117) : 0,290 mAMeasuring current of the measuring device: 1.8 mA Voltage Drop on AD8400: 203,7 mV,...

View Article

Re: AD8036: need clarification on "fast rectifier" use.

Regarding the peak detector function: integrating the rectified (out of the AD8036) wave will provide an image of the signal's amplitude, when this amplitude is constant.Detecting peaks is always a...

View Article

Re: ADV8003 IBIS model

thanks a lot!

View Article
Browsing all 22625 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>