Re: ADV7181C status
The ADV7181C is not recommended for new designs, the ADV7181D will be supported for new designs. I've forwarded the request to fix up the ADV7181C web page
View ArticleCLKOUT of AD5700
Dear Sir/Madam, Our customer will use your CLKOUT pin as open for checking motion when AD5700 doesn't work.When it is the enable condition, the internal oscillator work and increase the current I know....
View ArticleRe: [ADV7390] In case of PAL, which standard dose ADV7390 comply with?
BT.1700 and BT.470-6 are the newer standards. The ADV7390 will be able to handle these also. Remember the source is providing the timing.
View ArticleTips on interfacing OVM7692 to ADV7391
I have a customer that wants to convert the output of the OVM7692-RAAA (http://www.ovt.com/download_document.php?type=sensor&sensorid=46) to composite video. He thinks the ADV7391 would be...
View ArticleRe: Blending External OSD on Adv8005
Hi Jeyasudha,I have tested the latest firmware on eval board & run console commands like (pipinit, pipmode 5, pipmode 6 etc.) but can't see the exosd window. After pressing home button of TV remote...
View ArticleRe: Humming Noise in inductor in DC DC Buck converter
Manish, there are multiple reasons why a design could be audibly noisy.- stability- pulse skipping at audible frequency- inductor saturating- others For EZ to be able to help, you will need to post the...
View ArticleRe: ADE7758 LCYCMODE IRQ PROBLEM
Hi Hmani!! Thanks for the reply. About the first point, I have already solved the problem about the infinite loop, I've been using the PCINT0(pin change) pin of my Atmega 2560 instead of a INT0(falling...
View ArticleHTML help message ???
Hi !I'm using the latest VDSP5.1.2 version since 2 weekseverything works fine but if I press F1 to get the included helpI get a popup message box with following content "HH_HELP_CONTEXT called without...
View ArticleRe: [ADV7611]Default I2C addresses and updating different blocks registers
There is a ADV7611 driver that we support and maintain. Why not use that? There is a different group that could help you write your own driver, but that's not us. - Robin
View ArticleRe: ADF5355 Evaluation Board Schematic and Design Reference (gerber) files
Hi RBrennan Was the user guide uploaded?searched for UG-802 and found only reference to the HRM of the CM40x MCU. Would be glad if you'll post it/send it. BR,Alon
View ArticleRe: FFT in BF506
Hi Francesco,DMA is configured in Descriptor mode for Ping-Pong (while one is getting filled by ACM/SPORT, other can be used for processing); therefore have two buffers. As per your requirement, you...
View ArticleRe: How reliable are the multiplexers ADG706 and ADG726 in space?
Hi Suresh, We are not aware of the ADG706 or ADG726 ever being used for a space level application.The ADG706 and ADG726 are fabricated on a 0.60um CMOS process. Based on radiation test data from other...
View ArticleRe: ADF5355 Evaluation Board Schematic and Design Reference (gerber) files
Hi RBrennan Many thanks for this "light" speed response. BR,Alon
View ArticleRe: alsa player not showing ad1938 in raspberry pi
Hi, You need to create a so called board driver that describes how the ad1938 is connected to the I2S module of the RPI. For a simple example of such a board driver see for example this file. To make...
View ArticleRe: ADV7511 Sync Adjustment
Hi, did you try this using the evaluation board and settings as explained in ADV7511 Design Support Files? Regards
View ArticleRe: ADV7611 image dislocation
Hi, did you try this using the evaluation board and settings as explained in ADV7511 Design Support Files? Regards
View ArticleRe: [ADV7611]Enabling video adjustmnets
Hi, did you try this using the evaluation board and settings as explained in ADV7511 Design Support Files? Regards
View Article