Quantcast
Channel: EngineerZone: Message List
Browsing all 22625 articles
Browse latest View live

Re: Is AD9910 IO_UPDATE line gated by chip select?

Hi David, You can refer to this circuit note for reference on multiple chip sync on AD9910s: Circuit Note | CN0121 | Synchronizing Multiple AD9910 1 GSPS Direct Digital Synthesizers | Analog DevicesDDS...

View Article


Re: Analog Multiplier Questions

Hi Mark, Apologies for the delay in response. I already ask the product owner for you first question. I'll get back to you about this soon. On your second question, may i ask what exactly is your...

View Article


Sweep rate of AD 9956 and AD 9852

What is the sweep rate of AD9956 and AD9852?

View Article

Image may be NSFW.
Clik here to view.

Re: ADV7842 has black outline at the bottom

Yeah! I use the standard 7842 CVBS scripts to configure the part!  This problem does not appear when the input is HDMI! And I don't think that problem is triggered by the PC capture software since it...

View Article

Re: [ADV7281-M] Which interrupt registers can we use for SHORT-TO-BATTERY...

Hello Joe-san, Could you tell me the status for this question? Thank you.Best regards.

View Article


TX/RX Path Setup

I am using a Zed board and an FMCOMMS2 evaluation card as my reference for our custom SDR using the AD9361. I am running the NO-OS API on the Zed board project I downloaded from GitHub.  I can run the...

View Article

Re: ADE7880, Can't get ZXTOVA, ZXTOVB, ZXTOVC flag at STATUS1

Hi Karen Can you confirm if you don't write to the status register with ZXTOVx bits set to 1, involuntarily, before reading the register each time? If you did write it, that could explain why the...

View Article

Re: LVDS mode and Half Duplex Mode

Hello,  Thank you for your reply. Just to be clear .... when using LVDS mode, the value of D3 in 0x012 doesn't have any effect on the data interface. You just wont be able to transmit and receive data...

View Article


Re: Pulse Generator Circuit

Hi Rich, May I know what is your particular application? Also, what is the load condition of your circuit? Once you provide answers to these questions, we can suggest an ADI part that is suitable for...

View Article


Re: ADV3201 - Video Cross Point Switch

Hi, Siva. Please see attached for the eval board component placement. For more details on the pcb layout of the ADV3201 evaluation board, please refer to the attached a01862b_artwork in ADV3200_3201...

View Article

Re: U-boot for BF707-EZKIT

Hi DAB-Embedded, thanks for your effort and interest in Blackfin, we noticed you are a professional service provider and have included you in the recommended service provider list, as you can see from...

View Article

Re: ADP1051 Evaluation Board Transformer & Inductor SPEC.

Hi Jackey, We have a MathCAD design tool for the design. Since the isolated power design is much complex, we can provide the detail design information based on your inputs on power specifications, such...

View Article

ADV8003 IBIS model

Hi Helper     How can i get the ADV8003 IBIS model ?

View Article


Image may be NSFW.
Clik here to view.

Re: Where is the Hardware Trace?

Could you also attach your complete dmesg and crash log so we can discuss it case by case?

View Article

Image may be NSFW.
Clik here to view.

Re: Migrating from ADAU1701 to ADAU1401

     Hi,      Out of curiosity I loaded a project compiled for the -1701 into my ADAU1401 board and it worked exactly the same.  Got audio into the ADCs, came out the DACs, and the Real-Time Display...

View Article


Re: Will AD9269 could synchronize output?

Thanks a lot.

View Article

AD9257 Processing of the VCM pin

We are evaluating the AD9257, and concerned that the input of the VCM pin can affect the saturation performance of the ADC. We entering the following signal to the ADC in our system.・Common mode...

View Article


Re: [AD5933]How to achieve high accuracy of impedance measurement with small...

Hello, Miguel-san,Thank you very much for your reply! EVAL-AD5933 board revision is Rev. C. My apology is wrong information about targeted Resistor and Impedance value in my 1st thread...

View Article

Re: ADR421 output voltage hysteresis specification

Hi Tony, The product owner of ADR421 said that output voltage hysteresis is test to specific temperature range and we don't have data on your  temperature range. However, I can say that the one stated...

View Article

Re: AMUXVCC Spec of ADV3002

Hello, GuenterL-san. Thank you for your support. I meant not "ABSOLUTE MAXIMUM RATINGS" but "Operating range".Would you tell me the voltage range of AMUXVCC at operation?Is that same to P5V_x(4.7V -...

View Article
Browsing all 22625 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>