Re: AD9361 No-OS driver, set 128 taps for TX FIR
The fix for No-OS should be like this Linux fix: https://github.com/analogdevicesinc/linux/commit/07e7834e1dac187e6a45f2031bec8e104104e741 On Linux - you set/load the FIR filter - The FIR filter setup...
View ArticleRe: GoPro with ADV7180 / ADV212 pairing
Those are not NTSC variations---- they are totally different formats. On the ADV212 side, as long as the format is within spec it should be ok. On the ADV7180 though, I assume you are talking about...
View ArticleRe: SPORT delay
Hi Jithul, Thank you for your reply. I will have a look at the threads you mentioned and get back to you for confirmation. Regards,Torje
View ArticleRe: eval-adxl345-m setting
Neil, thank you for your response. I did download the updated software from the FTP site and am able to get the higher data rates from the satellite board. Can you confirm the jumper settings for...
View ArticleRe: GoPro with ADV7180 / ADV212 pairing
The reason I am using the ADV7180 / ADV212 pair is they are already in our existing product. A customer has asked us if we can support the GoPro with its NTSC variations. Where do I look to determine...
View ArticleRe: GoPro with ADV7180 / ADV212 pairing
Hello, For ADV212:1) Pixel clock under 75Mhz2) Tile size under 1.048M samples (assuming lossy)3) Throughput under 65MSPS assuming you are using VDATA in customer video mode. For ADV7180, I can't...
View ArticleClik here to view.
AD8237 cannot amplify the signal at micro volt (uV) level.
I use AD8237 as the first stage to amplify the EEG signal (5 uV to 100 uV). The gain is 10. The second stage is OPA2333, gain is 100. Power supply is a button battery. But I have a serious problem now,...
View ArticleADAU1761 PLL 'LOCK' related inquiry
Hi,We have some questions regarding PLL configuration/verification, specifically on detecting PLL 'LOCK'. 1) What is the minimum delay time required for the PLL to settle assuming good quality MCLK...
View ArticleRe: ADIS16209 SPI Interface
Sorry NevadaMark, I meant to say that the code I have written (as in the above post) works correctly (or at least it returns the values I expect from the datasheet). I did not expect it to be correct...
View ArticleRe: ADSP-BF561 Eval kit downloading error
Hi Asma, Shivam also started a thread on this issue, here, as well as contacting private support regarding the matter. As it stands, it appears this may be best pursued through private support. I will...
View ArticleRe: ADZS-BF561-EZ lIte kit hardware problem....Plz help
Hi, As you have reported this through private support, and followed up through that channel, I will continue to discuss this with you through that channel. If appropriate, we will post the outcome on...
View ArticleRe: ADV7611 configuration for 1080p 4:2:2 8bit
Yes, the ADV7611 can output 1080p60 16bit 422
View ArticleRe: Ad9361 Sampling Rate Issues
Dear DragosB, We normally use Visual Studio 2008 version. But we have support for 2013 as well. Since we use express editions and some of the macros are to be redefined, we feel, there we are losing...
View ArticleClik here to view.
Re: ADAU1701 DAC output filter if using differential-input amps?
Hi Marti, I would recommend the following simple filter. The 1.0 uF AC coupling capacitors should be valued based on the input impedance of your amplifier, as you suggest. There is no need for a second...
View ArticleRe: Blimp OSD v3.3 software issues.
Hi Jesse, The in-tool programmer doesn't work for that board yet actually. It needs to be done over the serial port. We'll get some instructions on how to do that posted for you. Dave
View ArticleRe: Using AD9467-FMC-250EBZ Reference Design
Hi Rich, As you probably saw the current supported EDK version for this particular board/carrier is 14.4. I've tested with 14.6 and it worked, but in 14.7 I get the same error as you. I would recommend...
View ArticleRe: ADV7513:Register setting file
1) 1. According to HDMI CTS version 1 Test ID 7-9: TMDS clock jitter for 720p60 = 3.37ns1) 2. The testing was done in an authorized test center using equipement specified or allowed by the CTS 2) 1....
View ArticleRe: AD7656 stop vonversion
Dear Karen, We add 100pF caps before CONV x lines. Partial shut down and stop conversion problem was fixed. I'm thinking if we can add some caps on CS, DOUTA, DOUTB and DOUTC? such as 10pF to...
View Article