AD9880 Audio issue
Hi everyone, I'm using the AD9880 with its HDMI input and I want to have the audio data in its parallel video output when the HDMI source is YCbCr, It's possible? I can't do it, I've been looking for...
View ArticleRe: AD5933 to measure impedance at 1000Hz
Hi Musach,Nowhere in the ANs for the AD5933 IC does it say that extra low-pass filtering is required when using a lower clock frequency. With 16MHz clock, the sampler operates at 1 MSPS and to adhere...
View ArticleRe: ADSP-21489 DMA for PDAP and memory data port
HI Marc, This does not happen . The External Port pins are multiplexed and when EPDATA has the value of 101 , only the ADDR pins act as PDAP data/control pins and scan the data . Even if the data from...
View ArticleRe: ADuM6132 Approvals
Hello rtresidd, We have not obtained VDE approval for this device yet, so none of the parts currently shipping have the (*) marking. Do you require a reinforced rating for your application? Should we...
View ArticleClik here to view.
Re: ADuM6132 Approvals
Hi Dave Thanks for clearing that up. Yep we'd love it if it's not going to take to long We're driving some FET's that are interacting with some 200+V DC.Due to the way the system is used there is...
View ArticleRe: AD5933 to measure impedance at 1000Hz
Hi, this is discussed here,page 8http://www.analog.com/static/imported-files/application_notes/AN-1252.pdf Regards,Miguel
View ArticleRe: ADV7612 Register Settings.
Hello, Q1) Comment is wrong.Q2) Yes, it's required. Dave
View ArticleClik here to view.
Re: Error Msg need help
Hi David, I did ICE test in continuous mode and found no error you can see the snapshot above.I am using exactly the same board and emulator as my colleagues. the version of my tools are also the same...
View ArticleAD5933 to measure impedance at 1000Hz
Thanks - I guess hadn't seen the latest AN.So, an external Nyquist filter is indeed needed if a lower clock frequency than 16 MHz is used. Is there by any chance an AN on a tunable lowpass filter...
View ArticleRe: ADV7850 initialization sequence or linux driver
Hello, In the FAQ section of this forum there is a Design Support Files page for ADV7850 which will have scripts to initialize the part for a variety of modes. That should get you started. Dave
View ArticleBuilding with live sources: BuildToolChain script reports unterminated quoted...
Hi, I am having some trouble building the toolchain from live sources.When executing the followinggit clone git://git.code.sf.net/p/adi-buildroot/code sources/buildroot sources/buildrootgit clone...
View ArticleRe: Optional add-on boards about AD-FMCOMMs1
These boards are evaluation boards that are sold by the product line. If you go to the product page of each of these parts , you will see all the info you need to get your hands on these boards....
View ArticleRe: BF518 Interface testing codes
Hi, Unfortunately we are unlikely to have the bandwidth to put together any additional example more specific to your exact requirement, however the INETD already has a 'Chargen' server thread, which...
View ArticleRe: BF60x: Can some signals be configred as GPIO's after boot?
Hi Itamar, That will work. Regards,Joe
View ArticleRe: Problem with the ADCC maximum throughpu
I just stripped the original code by removing SNR calculation related functions and ran on CM403 EZ-KIT. It worked fine without any problem. I applied sine wave of 1KHz 2Vpp at J9.1 (ADC0_VIN00) and...
View ArticleADF4350 intermittent Lock Detect
I made a frequency sweep from 1.9GHz to 3.5GHz at 2.5MHz steps every 1 Second and monitored the Digital Lock Detect (DLD).I found that the DLD was intermittent and in some frequencies the synthesizer...
View ArticleADV7390 analog output aspect ratio
Hi, When they use the PAL/NTSC output , they get aspect ratio of 5:4 instead of 4:3 which causes a round target to look like egg shape.Is there a way helping them configuring the part so they will get...
View ArticleRe: Please help to estimate resources of ADSP-BF592
Hi, From the datasheet of AD9248, it looks like, the device has two PPI port interfaces (due to dual ADC). However, BF592 has single PPI port. Are you planning to multiplex the those two PPI ports...
View ArticleADE7878 awatt register
Hello For example my source connected to the eval board has 577 Watts aprox. In the AWATT register I can read "d 68354" = 683,54, if I multiple this data by 0,838 the value is 577. I don't know if I...
View ArticleClik here to view.
Re: ADXL362 : Wrong activity detection (interrupt)
Hi, I was planning to operate this kind of operation (workaround), but I was expected that no interrupt would occur during the turn-on time (which seems to me logical). Is this behavior wanted ? If...
View Article