The HMC1099LP5DE is still in the pre-release life cycle so we don't have s-parameter mode files for this device at this time. We will provide this information shortly when the product is released.
You will need to determine the bias point experimentally by adjusting Vgg between -8V to 0V to achieve Idd of 100mA. The App note below provides guidance on biasing amplifier with gate bias control such as the HMC1099LP5DE.
https://www.hittite.com/content/documents/mmic_amplifier_biasing_procedure.pdf
For matching, maybe you can determine a match by looking at the smith chart of input and output ports on a network analyzer.
Hope this helps.