Quantcast
Channel: EngineerZone: Message List
Browsing all 22625 articles
Browse latest View live

Re: ADISUSBZ with ADIS16362 Gyro Data??

Hi CMTrantzas,  Based on what you shared with us, it sounds like JP1 is connected to +3.3V, when it needs to be connected to the +5V setting. For more information on this part of the setup process,...

View Article


Re: No OS ZC702 problem with _XPARAMETERS_PS_H_

Kelly, I guess that it should work fine also with 14.7. Just open the project in XPS 14.7 and export the design. After that recreate the SDK project using the new hardware platform. Regards,Dragos

View Article


Re: cf_adv7511_zed - "axi_hdmi_tx_v1_00_a was not found - please see console...

Hi, Did you clone the entire fpgahdl_xilinx repository? The axi_hdmi_tx_v1_00_a core is present in the /cf_lib/edk/pcores folder...

View Article

AD5732 not responding

I'm working on making this thing work for the last couple of days but nothing helps. I double and triple checked the electrical connections and I am 100% positive they are OK. My host MCU is an Atmel...

View Article

Re: Early termination of SPI using burst mode reads in an ADIS16364

Just one more quick note. Our team just confirmed your observations in an independent test: You need to read all of the registers in each Burst Read sequence to maintain reliable data integrity.  I am...

View Article


AD8220 Ref. Voltage

Hi, I am using AD8220 to amplify the output voltage of a Wheatstone bridge (there is only an NTC Thermistor in the bridge). I want to use the InAmp in single supply operation. The bridge is designed to...

View Article

Re: Detailed Info on the AD7609 CONVST A/B Signals

Hi Karen, I wondered if you have an answer for me yet on this post. We're a research institution and nothing is proprietary so I've attached the complete board file if you would like to check it out. I...

View Article

Re: ADL5317 was burned!

How do you generate the 71V then?

View Article


Re: ADL5390 Gain Drop With different phase in IQ baseband

Hi Yi, Do you have access to a signal generator and spectrum analyzer?  You may want to try those two pieces of test equipment instead of using a VNA.  Gain was measured with a spectrum analyzer and...

View Article


ADV7511 in board, how to change the channel of I2C bridge

    We select different I2C channel in our board with KC705 development board. I changed the I2C ouput in i2c_axi.c( note: Qlf ) and add i2c_axi.c and  i2c_axi.h in \\SDK_Workspace\sw\src. And I add...

View Article

why I can't use Project Wizard to create correct "LwIP Ethernet application"?

hi guys,i need to write a LwIP Ethernet application on ADSP-BF561 EZ-KIT Lite Evaluation System Rev1.3 and Blackfin USB-LAN EZ-Extender Rev1.2.  IDDE is VisualDSP 5.1.When i run the example in...

View Article

Modify+Rebuild reference design of AD9739A

Hello all, I am rebuilding the system.bit file from XPS and when I program the FPGA in SDK and I run it, I get an error(attached). I am using 14.4 version.The default bitstream is generated using 14.1?...

View Article

Re: Arduino UNO & ADXL362 problem

Hi Gsterken, To get the valid acceleration from the ADXL362, you need to enable it firstly by writing 0x02 to register 0x2D (POWER_CTL).  I would suggest you to read DEVID_AD, DEVID_MST, PARTID firstly...

View Article


Re: AD5933 and AD5934 evaluation board software commands

Thanks a lot for this post. I am trying to access AD5933 under Linux using EVAL-AD5933EBZ, would you please tell me the equivalent of Vendor_Request function in cyusb lib, please the same example of...

View Article

Re: Distorted color in HDMI transmission

No, we don't have the evaluation board. I am attaching a block diagram of our project for better understanding. The script I am using for ADV7612 is "6-1f" from the default scripts of Analog Devices....

View Article


Image may be NSFW.
Clik here to view.

ADV7180->480i->ADV8003 odd-even field issue

Continue below customer's issue, http://ez.analog.com/thread/42117, I have come to field to check the issue. Basic connection is ADV7180->480i=>ADV8003=>SD encoder=>LCD display and TTL...

View Article

Re: How do you synchronize conversions from 2 AD7799 converters

Thanks for all the answers.  I have tested the idea of writing to the registers of both at the same time to set mode and start conversion followed by individual data reads.  With the ADCs sampling at...

View Article


Re: AD5933 and AD5934 evaluation board software commands

And using <libusb-1.0/libusb.h> please.

View Article

Re: 7842-7511 eval board as VGA->HDMI converter

How it's going? The board is still completely unusable to me. BTW, speaking of firmware version - is it possible that recently bought board may not have an U-boot? I've connected RS-232 to the board's...

View Article

Re: ADAU1761 name

Hi larsc, In my custom board based on the zedboard, i have 2 adau1761, i will use the driver of adau1761, can i use the 2 codec wiyh different names by editing the driver?

View Article
Browsing all 22625 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>