what should be the minimum pixel frequency (fcli) for AD9927 14-Bit CCD...
I want to use AD9927 for the ccd sensor s10814. The maximum frequency of ccd sensor s10814 is 5 MHZ. So can i set the frequency of AD9927 at below 5MHz?
View ArticleRe: setting for ADV7511 ARC(audio return channel)
Hi Mike, My SW currently can't handle all CEC protocol message, only ARC message. I know CEC is better to be handled at application level. I have talked to DaveD and signed the required papers, waiting...
View ArticleRe: How to communicate with ADE7754 to make an energy meter with PIC18F2520
i am able display these value on lcd not on led.........i have a demo piece of watt meter using ADE7754 on led.......i am not able to reach at that accuracy....in it renesas 16 bit mcu used......is...
View ArticleRe: Techniques for compensating for effects of temperature on analog...
So you may have to do a piecewise interpolation - see AN-0970http://www.analog.com/static/imported-files/application_notes/AN-0970.pdf
View Articlei2c Scl clock is not generated in ADuC7060?
Hi there, I'm using ADuC7060 microconverter for our product development. Software needs to communicate with tmp432 (slave device) and ADuC7060 (master) board through i2c protocol. I developed the...
View ArticleRe: QPSK GENERATION (MATLAB HDLCODER)
Sir, the first one cannot be used as the blocks in Symbol timing recovery are not supported for netlist generation. How to save the ouput of adc in .mat format? thanks gitanjali
View ArticleRe: ADV7626 DDC bus rate
Hello GuenterL, Thank you for your advice. Please let me know about below our some question. Question１）>The Transmitter DDC clock is fixed by an internal ring oscillator. Why is the reason which DDC...
View ArticleRe: ADV7511 DDC bus rate
Hello all, Is transmitter DDC clock fixed by internal oscillator at ADV7511 (We ask same question at below ADV 7625 thread) ?http://ez.analog.com/thread/41583 If clock is fixed, cyaughn-san answers...
View ArticleRe: Algorithm to suppress self-excitation?
Hi Jackie: There is a low cost way to prevent feedback. Simply use a pitch shifting block to slighly modify the signal. SigmaStudio has a built in frequency shifter block. If you need a higher quality...
View ArticleRe: Using ADI Plug-In Algorithms in Sigma Studio
Hi Alex: Superbass algorithm is available and included on SigmaStudio, simply try it out with the 1701. I don't know if it's available on SigmaStudio for the Sharc. Regards Miguel
View ArticleHow can I control the SSn with custom communication protocol via UART?
Hi everyone, For now,I have generally finished the development with sigma studio,and going to work on the communication things.To math up with the MCU controller of own present products,my hardware...
View ArticleClik here to view.
Re: Read EEPROM from EvalBoard 1701!...
Hello, SigmaStudio includes the E2Prom Read/Write Window shown below. It appears from posts such as http://ez.analog.com/message/19512#19512, however, that it hasn't worked recently. When I...
View ArticleDisable 2rx2tx mode for AD9361
Hi, I saw there was a initial parameter for enabling/disabling 2rx2tx mode in no_OS driver. When I disabled this parameter, AD9361 failed to be initialized (dig_tune function in driver return -5 error...
View ArticleRe: AD8302 and AD9834 for phase and magnitude measurement
Dear Joel!Reading your answers is always a joy! So simplified language to understand. I highly appreciate your efforts. I'm working on the things to calculate the signal levels at different i/o points...
View ArticleRe: QPSK GENERATION (MATLAB HDLCODER)
Sir, the reading process should be real time.the method described above are not real time. thanks gitanjali
View ArticleAD9520-0 PLL locking
Hi,Have anyone working on AD9520-0?I need to lock the PLL. What are the steps to do it?I am trying it as below but unable to lock it.The first parameter passed is the address and second is the value...
View Articleinstalling the plugins on eclipse Kepler
I have installed the Blackfin plugins from the sourceforge site. Everything seemed to install correctly. When I build a simple hello world program I get the error :Toolchain "Blackfin Linux FDPIC GNU...
View ArticleRe: AD9548 DPLL is not locked
Hello Paul, Reading the AN-1061 attentively, I understood a non-controlling nature of the phase and frequency lock detectors. In my opinion frequency and phase locks are not threshold states such as...
View ArticleRe: a couple of question for AD8260
Hi Kaos, If those parts do not work for you, then you can use the high output current driver of the AD8260. I would recommend that you ground the input pins of the VGA and the buffer. The output...
View Article