Re: National Instruments ADI free software
Hi Dan, First, Analog Devices would like to apologize for any inconvenience this may have caused. Analog Devices wants to ensure that our models will function well in several industry standard tools....
View ArticleRe: AD-FMCOMMS3-EBZ "RF engineer’s platform"
Hi Stepper, What we mean by this is the following: On the FMCOMMS2 board we are using a 2.4GHz Balun with a narrow band maybe 1.6 to 3.3 GHz.This Balun has excellent performance at 2.4GHz which is the...
View ArticleRe: how to regenerate IP cores from core generator and rebuild the...
That is not the error, it is Make telling you that there is an error.You need to grep for it (may be in the *.par file).
View ArticleRe: AD-FMComms2 HDL support for Altera FPGAs
Around March 17, we should have vivado designs on Zynq boards.
View ArticleRe: Vivado for FMComms2/3/4
We should have it for Zynq boards by 03/17.The library and projects are in www.github.com/analogdevicesinc/hdl
View ArticleRe: ADT7461: Confirming how remote temperature is represented
Hi Rob, As of December 31, 2007, the following parts (including ADT7461) are no longer available through Analog Devices, Inc. Please contact ON Semiconductor for sales and...
View ArticleRe: AD-FMComms2 HDL support for Altera FPGAs
As I told you before, I have access to this board only: http://www.altera.com/products/devkits/altera/kit-arria-v-gt.html The FMCOMMS2 will NOT work with this carrier.The only design we have is...
View ArticleRe: A question about the Rising/Falling Sweep Ramp Rate of AD9915
Dear Sercan, I had one more question,In your file ANI_Ramp_Rate__AMP.STP.ZIP,Your Digital Ramp Upper Limit Register(0x05) = 00000FFFThis would be putting FFF in the lowest 12 bits(11:0) , I think. But,...
View ArticleCalculation of Current Power Usage in ADE7757
I want to provide a feature in my energy meter that will show the user, "Current Power" being used. Can anyone help me with the algorithm that I can use. I am interfacing ADE7757 chip with Arduino for...
View ArticleClik here to view.
Re: Problem in output from CF pin of ADE7757 IC
Hi hmani I rechecked the REF pin and it is at 2.5 V. I was unable to understand the purpose of removing 100nF capacitor from RCLKIN pin. I have made a PCB, and it is not possible for me to remove and...
View ArticleClik here to view.
Re: ADuC7061 ADC temperature drift and reference resistor temperature drift
What is the purpose of this? What measurements are the different colors belonging to?
View ArticleRe: Will the ADUC7023 init to default settings if the entire Flash is erase?
From this explanation I cannot figure out the problem and cannot give any feedback, it is not detailed enough and also I cannot see the picture attached. Can you provide more accurate details and the...
View ArticleRe: AD-FMComms2 HDL support for Altera FPGAs
That's the one. As far as I know, the LVDS direction on Altera devices is programmable. What I'm running into is that some FMC pins that your board requires to connect to LVDS pairs don't go to LVDS...
View ArticleADP5024: How to connect an unused Buck regulator
Hello, I was unable to find an answer to this in the datasheet... how should I connect the following ADP5024 pins if I do not want to use the second Buck regulator? VIN2, VOUT2, SW2, FB2, PGND2...
View ArticleADV7625 - OSD Enable and Transitioning between OSDs
Hello,We have been users of the ADV7623 for a number of years. We have developed OSD that does not use the ADI OSD Design tool and instead goes directly to the OSD register map and OSD Ram for OSD...
View ArticleRe: ADuC7061 ADC temperature drift and reference resistor temperature drift
There are 5 ADuC7061. In industrial environments with ambient temperature ranges from −40°C to +40°C is necessaryto use anotherADC.
View ArticleRe: How to communicate with ADE7754 to make an energy meter with PIC18F2520
Hi MARS Yes. For voltage channel, 1000:1 attenuation, using resistor divider, is common. So, it is fine. Please make sure that, even when the line voltage is at its absolute maximum value, it doesn't...
View ArticleRe: Question about a filter I have
Sorry you're running into this. It could certainly be clearer in our documentation for the filter wizard evaluation boards. The EVAL-FW-MOTHER motherboard is a four layer board. Layer 2 is "GND" and...
View Article