Re: Maximum current --ADV7619
Hello, GuenterL-san. Oh, I missed it.I'm sorry for bothering you. Kikka
View ArticleRe: ADV7511 and ADV7612 with WUXGA
Do you have EVAL-ADV7612-7511 (HDCP-enabled) or EVAL-ADV7612-7511P (non-HDCP)? -Matt
View ArticleRe: Enable of ADL5330
Hello enash-san, Thank you so much for information. Sincerely yours,Kou
View ArticleRe: Has the bug in the exponential decay block (constant db/sec) been fixed?
Likely the original (linear decay) version of this peak envelope detector may need preserving along with any new one. For example, we have existing products that could function in an...
View ArticleFMCOMMS2 DAC_DMA problems
I am using the latest version of fpgahdl_xilinx and no-OS sources (latest as of Jan 6/14) and running on the zc702 + FMCOMMS2 system. The project was created using version 14.4 tools. To test the...
View ArticleRe: FMCOMMS2 Zedboard no-OS Chipscope ADC signal not as in demo
Hi Herwin, Can you tell me where to get the latest HDL.Any special link ? Best reagards,Dan
View ArticleRe: FMCOMMS2 Zedboard no-OS Chipscope ADC signal not as in demo
The latest version is on github. https://github.com/analogdevicesinc/fpgahdl_xilinx Best regards,Herwin
View ArticleRe: AD532JHZ Replacement
Hi, Nandish. AD632 is pin-to-pin compatible with AD532 but has improved specifications. AD632AHZ and AD632SH are 10-pin Metal Header Package [TO-100] which are the exact package replacements of...
View ArticleRe: VisualDSP automation - Masking Interrupts
Hello, The issue is that we only read the target options from the registry at startup and then we use a local copy inside our library. Whenever you change the target options dialog and select OK we...
View ArticleADV7623 design collateral
Hello:I am looking for any design collateral that is available to aid in my design with the ADV7623. Is there a support wiki page? A reference design would be the ultimate but will take anything that...
View ArticleRe: AD5684 Power Management
Hi ddarko, The Vlogic pin of the AD5684 is the “Digital Power Supply” which powers up the digital block of your IC. It also sets on what level your digital communication line will be. The usual Vlogic...
View ArticleRe: ADV7623 design collateral
Have you seen the ADV7623 Design Support Files FAQ? http://ez.analog.com/docs/DOC-2573 It has some good information. -Matt
View ArticleRe: ADC7762 on board differentail amplifier
Hi Brad, Yes since these pins are connected to circuitry which is supplied by AVDD3.This is nominally a 5V supply, hence, it can take a 5V input signal. Thanks and Best Regards,Chris
View ArticleClik here to view.
Re: Gain Error for high resolution ADCs
Hi, The gain error is defined on page 13 of the datasheet as “the deviation of the difference between the actual level of the last transition and the actual level of the first transition from the...
View ArticleADV212 compressed image seems shrouded in a frog
Hi all: My ADV212 can work,but the compressed image seems not that right, I compressed tripes and dynamic video,these figures seem like shrouded in a frog,the figures are attached below,is the...
View ArticleRe: Positive Gain Error correction in AD7734
Hi Jebas, The system FS calibration reduces the FS error to the order of the noise. 0.01% equates to 1 mV for a 10 V input. From the noise tables, the p-p noise (which is equal to 6.6 x rms noise) is...
View ArticleRe: A couple of questions for AD7607
Hi, 1. That’s right, Figure 5 on page 9 follows the falling edge of CS on Figure 2 on page 8 of the AD7607 datasheet.2. By stopping reading, do you mean not issuing a RD/CS pulse to the part? Applying...
View ArticleClik here to view.
Re: about VisualAnalog
Hello Doug-san, Happy New Year. Thank you for reply. We check the our canvas by the following settings. Best regards,Kou
View Article