Hi
i am trying read ADV7441A User Map device id through I2C .ALSB pin pulled high with 5.2KE.
even with pull-down it is not working.
device is drawing 300mA on 1.8V, 25mA on 3.3V.
Reset is active low for 200ms on power on .
what else need to be checked for establishing to access the chip through i2c bus
i am not using DRCP port A and DRCP port B (HDMI ports) .
i am trying establish RGB decoding(DVI-A).
can any body help me
i am attaching my schematics