Hi,
Please check this issue.
For direct programming mode
if freq/amp/ph words are stored inside the profile registers
and
if they are driven with the PS2:PS0 pins' settling.
For example
* PS2:PS0 = '000' then profile1 register is storing the freq/amp/ph words
* PS2:PS0 = '001' then profile2 register is storing the freq/amp/ph words
* so on..
then
i suppose to check the profile registers and if detect a problem at any profile register then
i suppose to set a safe profile with PS2:PS0 pins.
This will bring to my system an option.
Waiting for your reply.
Regards,
Sercan