Dear Aaron,
(1) My first mail provides a complete uImage boot log from the time I load uImage (tftp) till u-boot re-boots and prints out the log buffer (I have truncated the last part of the log buffer since it gives the same information as the boot log). To answer your question - The card re-boots at a particular point during uClinux booting. The log buffer shows "...blackfin_uclinux/blackfin-buildroot/linux/linux-kernel/arch/blackfin/mm/init.c : 71 [init_pda]" as the last entry. Also, the last item printed before reboot is "[ 0.000000] Configuring Blackfin Priority Driven Interrupts# ". This happens every time I try to load uImage.
(2) I started with 2012 u-boot and 2014 uClinux. But, my last few attempts are with 2014 u-boot and 2014 uClinux.
(3) and (4) - Will carry out and post results.
- Misra
