I've just received the AD9625 Eval board and HSC-ADC-EVALEZ FPGA capture board. Hooking these together and using VisualAnalog and the SPIController software I can capture an RF signal; to capture a second signal I have to press and hold the 'BF_RESET' on the EVALEZ board, before I can capture again. If I don't do this, there is a failure to communicate between the board and controller, resulting in the SPIController hanging, and I need to reset/reboot the system. What setting am I missing to avoid having to press the RESET each time?
Clik here to view.
