Hello,
About Question 1,
I'll tell the customer that Table 22 setting is not based on any specification.
And I'll suggest the customer to change the register settings for manually adjusting the output syncs.
If you have information of register settings for ITU-R BT.601, please let me know it.
About Question 2 and 3, I think PIN_INV_F (CP register) is not related in this case because we use CVBS (NTSC) with SDP.
Questions from the customer are as follows, we can not get the answers from H/W manual.
Please help us.
Question 2
Please let us know about PF Polarity FIELD (SDP), Address 0x37 [3].
When we set this register to 0, Is it odd field when FIELD is high?
(When we set this register to 0, what field is indicated when FIELD is high? (Odd or Even))
Question 3
There are descriptions of "Field 1" and "Field 2" on Figure 52 on H/W manual page 136.
Does the "Field 1" indicate Odd field?
Does the "Field 2" indicate Even field?
Thank you!
Best regards.